I lost my electric fence tester, probably the pigs ate it. But I opened it once to resolder the earth wire and found it’s really just a voltage divider with resistors and leds, so I can probably rebuild with stuff I have. What resistor values though? 2k to 10k V run through the fence. If any of you good people have a diagram, a formula or an idea, please help.

  • jjagaimo@lemmy.one
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    1 year ago

    In the Wikipedia page there’s this formula

    Just plug in values for the fence voltage and led. You can just set vswitch to 0 and Vled to 2V. It should be fairly insignificant compared to the fence voltage. It should be 10-20mA (0.01-0.02) to not kill the led.

    The root of this is Ohms law: V=IR. Diodes cause a voltage drop rather than directly acting like a resistor which is why it’s subtracted from the input voltage.

    Just put them in series. Make 2x, one in each direction to account for AC and DC