Edit: see comments for clarifications.

I am probably late on this one, but god damn this is one nasty trick by Philips.

Context; I recently decided to upgrade my shaver, from a Philips One Blade to Philips an all-in-one-trimmer-7000. As you can see on the pictures below, they changed the charger for the adapter by maybe 1–2 millimetres, just so the old charger could not be used by the old charger. Now, this normally isn’t a big deal, but with the new trimmer, the charger is USB-A only. Where’s the previous one had the plug on it instead. To me this is mildly infuriating as I know need to get an extra adapter just to charge my shaver in the bathroom. They had the exact same design for the chargers, yet changed it just slightly so they wouldn’t be able to be reused? Why… Philips… why?

Edit: many good points in the comments! I don’t know how to manually check the voltage, but seems like folks figured it out in the comments too. Should have just been USB-C!

  • Sunny' 🌻OPEnglish
    1·
    3 months ago

    I don’t know how to check that, also can’t find the specs on the old one.

    • aesopjah@lemm.eeEnglish
      2·
      3 months ago

      FYI, to figure this out you would look at the part that plugs into the wall. there’s a bunch of writing on it. at one point it will say something like " input: 120-240 VAC, output: 15 VDC 0.5 A". that’s true for pretty much all transformer bricks. like if you want to see how much a USB brick will supply it will say on there “5V 2A” or whatever.

      • Sunny' 🌻OPEnglish
        1·
        3 months ago

        I only checked the (new) one that is USB-a only and that didn’t have any writing on it.