Why is it that Americans refer to 24 hour time as military time? I understand that the military uses the 24hr format but I don’t understand why the general public would refer to it like that?

It makes it seem like it’s a foreign concept where as in a lot of countries it’s the norm.

  • ShadowCatEXE@lemmy.world
    link
    fedilink
    arrow-up
    14
    ·
    8 months ago

    It’s standard in Canada as well. I prefer 24hr personally. There were a couple times where I’ve napped in the evening, and woke up thinking I was late for work in the morning. Not fun. 24hr clock solves that. Plus it just makes more sense to me than 12hr clocks.

    • CleoTheWizard@lemmy.world
      link
      fedilink
      arrow-up
      8
      arrow-down
      2
      ·
      8 months ago

      I have no strong opinion but I’ll give some reasons that people don’t often consider.

      Analog clocks are often easier to understand visually for people. A typical person will be awake for 16ish hours of the day. Which means that when looking at an analog 12 hour clock, you can easily see where you’re at in your day. That is both harder to do on an analog 24 hour clock and it also doesn’t make sense because you won’t really ever see 1/3rd of the clock get used. Military is forced to use it because the time is all digits which makes confusion less possible and displaying it easier.

      When talking about the digital version, again, it reflects how humans experience time easier. Again consider using a clock in which you will not typically see or use a third of the numbers for anything. Why do that?

      I think a lot of what bugs us about these two systems is the zero points. If I could redo it, I’d put 12am to line up and make 6am noon. Then 6pm is now evening/night.

      I suggest that because the current 12hr systems are set up to benefit capitalism. It’s meant to make you forget how long you’re working in the US. And telling people that waking up at 5am to do stuff is morning is also stupid. It’s still night time at that time and our clocks don’t reflect that at all.

      • Scrof@sopuli.xyz
        link
        fedilink
        arrow-up
        9
        arrow-down
        4
        ·
        8 months ago

        I’ve never even seen a digital clock that’s not 24h. I actually can’t see at all why it would be easier to see where you’re at in the day with the 12h AM/PM lol. Definitely an American thing.

        • CleoTheWizard@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          8 months ago

          I mean it’s a minor difference and you get used to both systems, but like I said, by cutting the scale in half from 24 to 12 you’re magnifying the difference in time. For instance, 3 to 6pm on 12 hour clocks is 25% of the scale whereas it’s actually 12.5% of the overall day on 24hr scale. But you don’t experience the overall day, you sleep for a big chunk of it. In other words, the 12hr clock is more appropriately representing that time to you as a portion of your waking day.

          Consider this: if I told you the time in an accurate but larger quantity, how would it look to you? Like if I told you that my clock is 48 hours and resets every two days to go from 0 to 48, wouldn’t it change your perception of time? It creates dissonance that a 3 hour meeting would feel very long and yet it is such a small portion of your two day clock. That’s kind of how Americans feel about 24hr clocks.

          • Honytawk@lemmy.zip
            link
            fedilink
            arrow-up
            3
            ·
            8 months ago

            You think you are magnifying things, but you aren’t.

            The minute hand on an analogue clock goes equally as fast whether you use 24 hour or 12 hours.

            In fact you are even losing accuracy, because if someone tells you to be there at 6 o clock, you have 2 possible times. Whereas with 24, there is only one possibility.

            That is why you need to specify with AM and PM.

            And in a digital clock it matters even less.

            Now explain to me like I am 5, why does a 12 hour clock go from 11 PM to 12 AM to 1 AM?

            Why is that 12th hour considered the start of the 12 hour cycle, instead of the end?

            • CleoTheWizard@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              8 months ago

              I guess I’ve become the 12hr clock simp here (I’m not tho, use whatever) so here I go.

              Forget the minute hand. If I have a 24hr clock, the hours will be more crowded. Meaning that the per-hour angle of each number is halved. I’d imagine this somewhat limits clock design or runs the danger of being harder to tell which hour you’re actually on with a short hour hand. The numbers must be smaller and the hour hand must be longer for the same accuracy.

              And yes you are losing technical accuracy with a 12hr clock. But a few things about this. Again it’s more about that humans actually experience time in smaller segments than 24 hours. You don’t experience a full 24hr day. You usually experience a smaller segment like 12-16 hours. This is especially true if you divide your time into day/night or work/leisure.

              Now the obvious downside like you mentioned is the am/pm thing. However, that usually isn’t a problem and I don’t get how people would reference 24hr clocks in conversation. Do they say “yeah sure, we can grab drinks at eighteen hundred” or “eighteenth hour” or do they just say eighteen? (American problems).

              It’s usually not a problem because context goes a very long way. If I ask you to grab lunch at 2, obviously it’s 2pm. If I ask to grab drinks at 8:30, it’s pm. Most social events come with a time context and most social events are in the afternoon. There’s surprisingly little overlap between events that would be early morning/late evening.

              And yes I know digital clocks the formats matter less. It’s a preference thing, no one should care much.

              As for the reason for 12 being the changeover time, it’s all for analog clocks. Looking at an analog clock, when determining the hour you draw a line out from the hour hand. Whatever is the nearest number counter-clockwise, that’s what hour it is. So the 12th hour exists. Otherwise you’d have it go from 11:59 to 0. And zero o’clock makes no sense, especially at noon. Again, no clue how anyone would reference this in 24hr. Half passed midnight maybe? But again if you can say pick me up from the party at 12:30am, you don’t have to reference midnight but people still do sometimes.

              As for 12am vs pm, it’s simply because the clock transitions at its apex. If it didn’t, it’d be confusing. Also 11:59 is midnight in either system, so it’s the middle of the night. And it creates an obvious transition for midday to exist.

              I hope that clears up why the system exists and why I personally prefer it. Again, use whatever works, but I promise the system works pretty well for everyone that uses it. The more disruptive thing is daylight savings time, not the system itself.

    • 📛Maven@lemmy.sdf.org
      link
      fedilink
      English
      arrow-up
      4
      ·
      8 months ago

      It’s definitely not standard in Canada. I wish it was. Every time I buy something, I have to figure out how to swap it to 24h mode.

    • cecilkorik@lemmy.ca
      link
      fedilink
      English
      arrow-up
      2
      ·
      8 months ago

      It’s veeeeery not standard in Canada. I use it on my phone and most people who see it on the lockscreen treat me like I’m an alien, and it’s about a 50/50 mix of people who simply think 24 hour time is weird (but at least recognize it) vs. people who seem genuinely baffled by the digits they see appearing on my phone and don’t even seem to recognize it as a time at all.