Hey everyone,

I am completely stripping my house and am currently thinking about how to set up the home network.

This is my usecase:

  • home server that can access the internet + homeassistant that can access IoT devices

  • KNX that I want to have access to home assistant and vice versa

  • IoT devices over WiFi (maybe thread in the future) that are the vast majority homemade via ESPHome. I want them to be able to access the server and the other way around. (Sending data updates and in the future, sending voice commands)

  • 3 PoE cameras through a PoE 4 port switch

  • a Chromecast & nintendo switch that need internet access

Every router worth anything already has a guest network, so I don’t see much value in separating out a VLAN in a home use case.

My IoT devices work locally, not through the cloud. I want them to work functionally flawless with Home assistant, especially anything on battery so it doesn’t kill its battery retrying until home assistant polls.

The PoE cameras can easily have their internet access blocked on most routers via parental controls or similar and I want them to be able to send data to the on-server NVR

I already have PiHole blocking most phone homes from the chromecast or guest devices.

So far it seems like a VLAN is not too useful for me because I would want bidirectional access to the server which in turn should have access from the LAN and WiFi. And vice versa.

Maybe I am not thinking of the access control capability of VLANs correctly (I am thinking in terms of port based iptables: port X has only incoming+established and no outgoing for example).

I figure if my network is already penetrated, it would most likely be via the WiFi or internet so the attack vector seems to not protect from much in my specific use case.

Am I completely wrong on this?

  • ohhello@feddit.nlEnglish
    1·
    2 months ago

    Pihole by itself can’t really block all the traffic as some device may be set to use different DNS server from factory. And with DNS over HTTPS, to block phoning home, you’d most probably have to completely block internet access for that device.

    I’m looking at VLANs as groups of devices which shares the same access policies. So e.g. you create VLAN for cameras, create rules for accessing the NAS, HA, etc. and then just assign each camera to that VLAN. You don’t need to recreate same rules for every new camera.